Cradlepoint COR IBR650LP2-EU User Manual download pdf (Page 86)

CRADLEPOINT COR | USER MANUAL Firmware ver. 5.0.0

6.7 Routing Protocols

NOTE: Routing Protocols require a feature license. Go to System Settings → Feature Licenses to enable these features.

A routing protocol is a protocol that specifies how routers communicate with each other, disseminating information that

enables them to select routes between any two nodes on a computer network. Routing algorithms choose the route. Each

router has a prior knowledge only of networks attached to it directly. A routing protocol shares this information first among

immediate neighbors, and then throughout the network. This way, routers gain knowledge of the topology of the network.

Choose from the following tabs to configure routing protocols:

• BGP Routing

• OSPF Routing

• RIP Routing

• RIPNG Routing

• Route Maps and Filters

6.7.1 BGP Routing

The latest version of BGP (Border Gateway Protocol) is version 4. BGP-4

is one of the Exterior Gateway Protocols and de facto standard of Inter

Domain routing protocol. BGP-4 is described in RFC1771, A Border

Gateway Protocol 4 (BGP-4). BGP is a distance vector routing protocol,

and the AS-Path framework provides distance vector metric and loop

detection to BGP. RFC1930.

BGP Editor

• Name: Unique name of the policy.

• ASN: The AS (Autonomous System) number is one of the

essential elements of BGP.

• Router-ID: This sets the router-ID of the BGP process. The router-

ID may be an IP address of the router, but need not be - it can be

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 248 249

No comments

Cradlepoint COR IBR650LP2-EU User Manual Page 86