Cradlepoint MBR1400W Setup Guide download pdf (Page 21)

Troubleshooting

You may need to update the CradlePoint MBR1400 rmware to get our latest features or to use with

new modems. For more information, visit knowledgebase.cradlepoint.com

HOW TO UPDATE FIRMWARE (AUTOMATIC)

1) Connect your computer to the router via the WiFi SSID or to an orange Ethernet LAN port with an Ethernet cable.

2) Open a browser window and type “cp/” or “http://192.168.0.1” in the address bar. Press enter/return.

3) When prompted for your password, type the default password found on the MBR1400 product label.

4) Select SYSTEM SETTINGS -> SYSTEM SOFTWARE.

5) If new rmware is available, select AUTOMATIC (Internet). (This process requires an active data source.)

6) Wait a moment while rmware is updated and the router reboots (do not close the browser window when updating).

HOW TO UPDATE FIRMWARE (MANUAL)

Downloading rmware before updating is only required if your modem doesn’t work in the router initially.

1) Go to www.cradlepoint.com/ﬁrmware. Select the MBR1400 from the dropdown list.

2) Download the most current version of the router rmware to your desktop.

3) Follow steps 1-4 above. Select MANUAL FIRMWARE UPLOAD and click the BROWSE button.

4) Select the rmware le you saved to your desktop and click OPEN and then BEGIN FIRMWARE UPGRADE.

5) Wait a moment while rmware is updated and the router reboots (do not close the browser window when updating).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Cradlepoint MBR1400W Setup Guide Page 21