Cradlepoint PS6SMC70M User's Guide download pdf (Page 8)

CradlePoint USB/Modem Charging Cradle User Guide

Charging Your Handheld Terminal’s Battery

The cradle may also be used to charge the handheld terminal’s battery. To charge the

terminal's battery:

1. Ensure the cradle is powered on.

2. Insert the terminal in the cradle as shown.

a. The Terminal Battery Charge LED wi

“Slow Blink Amber” to indicate that

the terminal is charging.

b. When the terminal has completed

charging, the light will turn “Solid

Amber” to indicate the battery is

fully charged (approximately 4

hours).

c. If the terminal shows a “Fast

Blinking Amber” light, there is an

error in charging. Reseat the

terminal in the cradle to see if that

fixes the issue.

d. If you do not see a

charging light,

the terminal may not be placed in

the cradle correctly, or the cradle

may not have any power.

Charging Your Spare Battery

To charge the terminal's spare battery:

1. Orient the battery so that the charging contacts are facing down and toward the right

side of the cradle

2. Insert the battery in the spare battery charging slot in the rear of the cradle as

shown. Then gently press down on the battery to ensure proper contact.

a. The Spare Battery Charge LED will “Slow

Blink Red” to indicate the battery is

charging.

b. When the LED turns “Solid Red” the battery

is fully charged. A standard battery is fully

charged in less than 4 hours and less

than 6 hours for the

Extended Life Battery.

c. If the LED

shows a

“Fast Blinking Red”

you have a problem

with charging.

Check to see if

the spare battery

is inserted

correctly.

CradlePoint, Inc

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Cradlepoint PS6SMC70M User's Guide Page 8

Comments to this Manuals

Related products and manuals for Battery chargers Cradlepoint PS6SMC70M