Cradlepoint IBR600 User Manual download pdf (Page 96)

CRADLEPOINT IBR600 | USER MANUAL Firmware ver. 3.3.0

7.6 Modem Settings

This section allows you to change the

settings for your embedded modem.

7.6.1 Update/Activate a Modem

The embedded modem can be

activated (or reactivated/upgraded).

Select the checkbox next to the

CradlePoint device and click ―Update /

Activate‖.

 Modem Activation / Update: Activate, Reactivate, or Upgrade Configuration. Click Activate to start the process.

If the modem is connected when you start an operation

the router will automatically disconnect it. The router may

start another device as a failover measure. When the

operation is done the modem will go back to an idle state,

at which point the router may restart it depending on

failover and failback settings.

NOTE: Only one operation is supported at a time. If you try to start

the same operation on the same modem twice the UI will not report

failure and the request will finish normally when the original request is

done. However if you try to start a different operation or use a

different modem, this second request will fail without interfering with

the pending operation.

Process Timeout: If the process fails an error message

will display.

Activation has a 3-minute timeout.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 151 152

No comments

Cradlepoint IBR600 User Manual Page 96