Cradlepoint MBR1200 User Manual Page 31
- Page / 132
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
CRADLEPOINT MBR1200 | USER MANUAL Firmware ver. 1.6.12
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 29
802.11 Mode. (Default [Mixed 802.11 b/g/n]). Select Wi-Fi
operating mode (802.11b/g/n, 802.11b/g, 802.11n, 802.11b,
802.11g).
Enable Auto Channel Scan. When the power is first turned on,
the MBR1200 will check the available wireless bands for the least-
used channel.
Wireless Channel. (Default: randomly selected among channels
appropriate for 802.11 setting). Channel to transmit and receive.
Channels 1 through 11 are available for 802.11 b/g/n in the U.S.
Check if you employ channel planning in your building.
Transmission Rate. (Default: Best). By default the fastest
possible transmission rate will be selected. You have the option of
selecting the speed if necessary. Channel rates are doubled for MCS when Channel Width is set to 40 MHz.
Channel Width. The Auto 20/40 MHz option is usually best. The other options are available for special circumstances.
Visibility Status. Whether or not the SSID will be visible on the LAN. The Invisible option allows you to hide your wireless network. When this
option is set to Visible, your wireless network name is broadcast to anyone within the range of your signal. If you're not using encryption then they
could connect to your network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID) on the client manually to
connect to the network.
4.6.2 Wireless (WI-FI) Security Mode
Unless one of these encryption modes is selected, wireless
transmissions to and from your wireless network can be easily
intercepted and interpreted by unauthorized users.
Security Mode. (Default:WPA-Personal). The MBR1200 supports
three wireless security modes including: WEP, WPA-Personal,
and WPA-Enterprise. WEP is the original wireless encryption
standard, and is not considered as secure as WPA. WEP should
only be used if encryption is needed, but WPA encryption is not
supported by your client devices.
WPA provides a higher level of security, and is the recommended security setting for most users. WPA-Personal does not require an
authentication server. The WPA-Enterprise option requires an external RADIUS server for authentication.
(continued)
- Preface 2
- Table of Contents 3
- 1 INTRODUCTION 5
- 2 HARDWARE OVERVIEW 7
- 2.1 Ports 8
- 2.2 LEDs 9
- 3 QUICK START 10
- button 12
- button so that so that 12
- 3.4 Common Problems 13
- 4.1 Basic Tab 17
- 4.2 Wizard (Setup Wizard) 18
- (continued) 19
- 4.2.6 Setup Complete 20
- 4.3 DHCP (DHCP Settings) 21
- is activated 22
- operation first 22
- 4.3.3 Add DHCP Reservation 23
- 4.3.4 DHCP Reservation List 25
- 4.4 Network 26
- 4.5 WAN Configuration 28
- 4.5.4 DNS Settings 29
- 4.6 Wireless (WI-FI) 30
- is set to 40 MHz 31
- 4.6.3 WEP 32
- 4.6.4 WPA (Personal) 33
- 4.6.5 WPA (Enterprise) 34
- 4.6.6 EAD (802.1X) 34
- 5 ADVANCED TAB 36
- 5.1 Access Control 37
- (continued) 38
- 5.1.3 Policy Table 40
- 5.2 Failover/Load Balance 41
- 5.2.3 WAN Load Balancing 42
- 5.2.4 WAN Interfaces 42
- 5.3 Firewall 44
- 5.3.3 NAT Port Preservation 45
- 5.3.4 Anti-Spoof Checking 45
- 5.3.5 DMZ Host 45
- 5.4 Gaming 48
- 5.4.2 Gaming Rules 49
- 5.5 Inbound Filters 50
- 5.6 MAC Address Filter 52
- 5.6.3 MAC Filtering Rules 53
- 5.7 Network 54
- 5.8 Routing 55
- 5.8.2 Routes List 56
- 5.8.3 Existing Routes 56
- 5.9.1 Add Application Rule 57
- 5.9.2 Applications Rules 58
- 5.10 Traffic Shaping 59
- 5.11 Virtual Server 63
- 5.11.2 Virtual Server List 64
- 5.13 Wireless (WI-FI) 67
- 5.14 WI-FI Protected Setup 69
- 5.15 WISH 72
- 5.15.4 WISH Rules 73
- 6 MODEM TAB 74
- 6.1 Info 75
- 6.2 GPS 76
- 6.2.3 Map Settings 77
- 6.2.4 GPS Network Access 77
- 6.3 Settings 78
- 3G/4G Modems 80
- 6.4 Update 83
- 7 TOOLS TAB 84
- 7.1.1 System Language 85
- 7.1.2 Admin Password 85
- 7.1.3 System Name 85
- 7.1.4 Administration 86
- 7.2 Dynamic DNS 87
- 7.3 Email Settings 89
- 7.4 Firmware 91
- 7.4.5 Firmware Update Notes 92
- 7.5 IPsec VPN 94
- 7.5.3 IPSEC Policy List 97
- 7.6 Managed Services 98
- 7.7 Schedules 99
- 7.7.2 Schedule Rules List 100
- 7.8 SNMP 101
- 7.9 Syslog 102
- 7.10.1 System Settings 103
- 7.11.1 Ping Test 104
- 7.11.2 Ping Result 104
- 7.12 Time 105
- 7.13 User Login 107
- 8 STATUS TAB 108
- 8.1 Device Info 109
- 8.1.3 LAN 110
- 8.1.4 Wireless (Wi-Fi) LAN 110
- 8.2 Active Sessions 112
- 8.3 Logs 113
- 8.4 Routing 114
- 8.5.1 Traffic Statistics 115
- 8.6 Wireless (Wi-Fi) 116
- 8.6.3 Remembered Clients 117
- 8.7 WISH Sessions 118
- 9 GLOSSARY 119
- 10 APPENDIX 130
- 10.3 Specifications 131
© 2020, manymanuals.com. All rights reserved. | 0.100 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals