Cradlepoint IBR600 User Manual download pdf (Page 63)

CRADLEPOINT IBR600| USER MANUAL Firmware ver. 3.3.0

6.7.2 Local Network Editor

The Local Network Editor contains the following tabs: IP Settings, Interfaces, Access Control, and DHCP Server.

IP Settings:

Name: This primarily helps to identify this network during

other administration tasks.

Hostname: [Default: cp (for CradlePoint)] The hostname

is the DNS name associated with the router's local area

network IP address.

NOTE: You can access the router‘s administration pages by typing

the hostname into your browser, so if you change ―cp‖ to another

hostname, you can access the administration pages through the new

hostname.

IP Address: This is the address used by the router for

local area network communication. Changes to this

parameter may require a restart to computers on this

network.

Each network must have a distinct IP address. Most users

will want an address from one of the following private IP ranges:

 10.0.0.1 - 10.255.255.1

 172.16.0.1 - 172.31.255.1

 192.168.0.1 - 192.168.255.1

NOTE: The final number does not have to be 1, but it is a simple, logical convention for routers that leaves higher numbers free for other devices.

Netmask: (Default: 255.255.255.0) The netmask controls how many IP addresses can be used in this network. The

default value allows for 254 IP addresses, which is enough in most cases.

Routing Mode: (Default: NAT) Each network can use a unique routing mode to connect to the internet and other local

networks. NAT is desirable for most configurations. Select from the following options in the dropdown list:

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 151 152

No comments

Cradlepoint IBR600 User Manual Page 63