Cradlepoint IBR600 User Manual download pdf (Page 77)

CRADLEPOINT IBR600| USER MANUAL Firmware ver. 3.3.0

6.8 WiPipe QoS (Advanced Mode only)

When WiPipe QoS (Quality of Service/Traffic

Shaping) is enabled, the router will control the

flow of internet traffic according to the user-

defined rules. In other words, Traffic Shaping

improves performance by allowing the user to

prioritize applications.

Enable WiPipe QoS: Click on this box to open

options for controlling internet traffic. You can

control Uplink Speed values or define your own

Traffic Shaping rules. When WiPipe QoS is

enabled, the router restricts the flow of outbound

traffic so as not to exceed the WAN uplink

bandwidth.

Default Uplink Speed: By default, the Uplink

Speed values are set as fast as possible. Click

to deselect default values if you want to restrict

the maximum uplink speed for the internet

source(s) you are using (4G Modem, Ethernet,

3G Modem, and/or WiFi).

You might do this to reduce overall bandwidth

use for cost reasons or to prioritize available

bandwidth for download. It is recommended that

you experiment with different values for your particular internet connection to yield the best results.

NOTE: Uplink speed is the speed at which data can be transferred to your ISP. You can test your uplink speed with a service such as

speedtest.net.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 151 152

No comments

Cradlepoint IBR600 User Manual Page 77