Cradlepoint IBR600 User Manual download pdf (Page 93)

CRADLEPOINT IBR600 | USER MANUAL Firmware ver. 3.3.0

Page 1: General

Tunnel Name: Choose a name that is meaningful to you.

Local Network: This is the local side of the ―Glue

Network,‖ a network created by the administrator to form

the tunnel. The user creates the IP address inputted

here. It must be different from the IP addresses of the

networks it is gluing together.

Choose any private IP address from the following three

ranges that doesn‘t match either network:

 10.0.0.0 - 10.255.255.255

 172.16.0.0 - 172.31.255.255

 192.168.0.0 - 192.168.255.255

Remote Network: This is the remote side of the ―Glue

Network.‖ Again, the user must create an IP address that

is distinct from the IP addresses of the networks that are

being glued together.

The Remote Network and Local Network values will be

flipped when inputted for the other side of the tunnel

configuration.

Subnet Mask: This is the subnet mask for the Glue

Network. The Local and Remote Network addresses

must fit with this mask. 255.255.255.0 is a logical choice

for most users.

Remote Gateway: This is the public facing, WAN-side IP address of the network that the local gateway is going to

connect to.

Tunnel Enabled: Select to activate the tunnel.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 151 152

No comments

Cradlepoint IBR600 User Manual Page 93